Categories

System glitches and false alarms can be frustrating, and even more concerning, could prevent your home’s security from working how it should. Luckily, most problems, from dead batteries to false alarms, are simple to correct. Explore our suggestions for troubleshooting your home alarm system in Bellingham. We’ll help you keep your family members safe and your system operating smoothly.

Test Your Home Security System In Bellingham

One great way to troubleshoot your home’s security is to test it yourself! Modern systems let you put them in test mode to avoid triggering an emergency response from monitoring agents. Once you’re in test mode, follow these steps:

• Arm your system as you would when going out.
• Open a door or window protected by a contact sensor, or test other devices. Shut the door or window so it doesn’t prompt the alarm when you get out of test mode.
• Allow the alarm to resonate for 60 seconds to make sure a message is delivered to the security company and an entry is made in the alarm system log.
• Proceed to test equipment as you wish
• Review the alarm’s activity log to confirm that everything’s working.

Don’t worry, monitoring professionals can tell that your alarm system is being tested. Be sure to turn test mode off when complete. It’s smart to test every other month or anytime you change your home’s internet or phone connectivity.

Check The Positioning And Condition Of Motion Detectors

Although an crucial element of your alarm system, motion detectors are well known for false alarms. Do your part to prevent them with some basic troubleshooting.

• Do a physical check. Are there things that could shift within the sensor’s detection range, like a window treatment blown in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can lead to poor performance. Ensure the sensor is clean.
• Does the motion detector have pet immunity you can activate? Some sensors can be set to disregard pets weighing as much as 100 pounds.
• When was the battery last replaced? A low battery might affect performance or lead to false alarms.
• Is a heat source impacting the sensor? Too much heat from a fireplace, direct sun, or something else can set off an alarm.

Keep Batteries Ready And Watch Out For Low Battery Notifications

One of the great aspects of new home security systems is that they’ll tell you when batteries are running low. If your system is equipped with a control panel or app, you’ll often find alerts there. Depending on your alarm, you could notice an intermittent beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that need to be replaced every so often. It’s best to keep batteries ready and set a replacement schedule. Many systems also come with a rechargeable backup battery for the main control panel. This backup battery helps keep your system running if your power goes out and should charge back up once power is back online. If it doesn’t, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Bellingham 

As the foremost name in home security, ADT builds systems that offer unsurpassed functionality and protection. Getting into test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always get alerts when a sensor battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Bellingham home. Dial (360) 205-2750 or fill out our form today!